Category:
Applications:
OnRobot
Dual Quick Changer
Product Feature
- Dual gripper speeds cycle time and can improve productivity by 50% or more.
- The new Dual Quick Changer enables you to use our end-of-arm tools together in a single cycle. With this innovative solution you can use two RG2 grippers or an RG6 gripper with a VG10 – it’s entirely up to you. Quickly and seamlessly switch between OnRobot tools to maximize the utilization of your robots with the Dual Quick Changer.
- The Dual Quick Changer has built-in electric feed-through for OnRobot tools. You can connect various tools. You can even use a Quick Changer Tool Side if you wish to use a non-OnRobot tool as well.
Specification
| Permissible force | Maximum: 400 [N] |
| Permissible torque | Maximum: 50 [Nm] |
| Rated payload | Maximum: 20 [kg] / 44 [lbs] |
| Repeatability | ±0.02 [mm] |
| IP Classification | IP64 |
| Operating life (Tool change) | Typical: 5,000 [cycles] |
| Operating life (Robot operation) | Minimum: 10 [M cycles] |
Purchase Information
| Availability | Global |
Compatibility
| TM Model | All TM series All TM S series |
| Hardware | HW3.2 HW5.0 |
